All American Products Co.

Easy to use:
1) Clean T-Slot.
2) Insert 1/4 Turn Nut as shown, or install stud or bolt 
directly into 1/4 Turn Nut. Place into slot and rotate.
Hot Forged, Heat Treated, Black Oxide Finish.

Add Studs and clamp straps without tearing
down previous set-ups.
Supplements standard T - Slot Nuts.
Seven sizes are available, covering 3/8",
1/2", 5/8" and 3/4" stud diameters with
different slot widths.
Case hardened alloy steel. Last thread closed.

RC In Mid 40's
Last thread Incomplete to prevent stud from
turning through bottom of nut Into machine tool&
Conform to TCMA standards. Tapped thru
T-nuts are available upon request. T-slot Nuts
are undersized to fit machine table slot.
*ENGLISH T-SLOT NUT WILL FIT THIS METRIC
MACHINE T-SLOT.
CASE HARDENED.
BLACK OXIDE FINISH.

Black Oxide Finish.
Case hardened.
Dimensions in millimeters.
Threads metric.
The last thread is incomplete on T-Slot Nuts
to prevent stud from turning through bottom
of nut into machine table.
Tapped Through T-Slot Nuts are also available
- to order Tapped Through, add a " T " after
the part number.
Special sizes quoted on request.

304 Stainless Steel
The last thread is incomplete on Stainless Steel T-Slot Nuts to prevent the stud from turning through the bottom of the nut. Stainless Steel T-Slot Nuts are undersized to fit the machine table slot.

CASE HARDENED.
BLACK OXIDE FINISH.

Black Oxide Finish.
Case Hardened.
All dimensions in millimeters.
Coupling Nuts can be used to join two or
more studs to achieve a desired length.

The closed end of the acorn nut protects stud
threads from damage and keeps out grit and chips.
HARDENED, BLACK OXIDE FINISH.

Light - Low Crown.
HARDENED - BLACK OXIDE

Hardened pad remains stationary upon
contacting part being clamped. This allows
rigid clamping without marring or moving part.
CASE HARDENED.
BLACK OXIDE FINISH.

• UNC COARSE THREAD
• UNF FINE THREAD

CASE HARDENED
BLACK OXIDE FINISH

Black Oxide Finish.
Case Hardened.
All dimensions are in millimeters.
When used with spherical washers, flange nuts will equalize

416 Stainless Steel

CASE HARDENED
BLACK OXIDE FINISH

416 STAINLESS STEEL

CASE HARDENED
BLACK OXIDE FINISH
Assembly consists of 269-00 series and
bottom half of 276-00 series.

416 STAINLESS STEEL

Head rotates but washer remains stationary
upon contact and holds rigidly without marring
work piece.
CASE HARDENED - BLACK OXIDE FINISH.

Check Nuts prevent backing off during operation
due to chatter or vibration. Check Nuts can be
used in conjunction with many other components
such as Knurled Head Screws, Torque Screws,
Hand Knob Assemblies, Toggle Shoe Clam
assemblies and many other tooling applications.
Furnished with all Torque Head Screws with
Swivel Pads.
BLACK OXIDE FINISH.

CASE HARDENED, BLACK OXIDE FINISH

CASE HARDENED, BLACK OXIDE FINISH

MANY SIZES FUNCTIONALLY INTERCHANGE OR CONFORM TO T.C.M.A . STANDARDS.
(Drilled Holes For Spanner Wrenches)
CASE HARDENED, BLACK OXIDE FINISH

Forged Carbon Steel, C1030
Heat-Treated to ASTM A105.

Each set contains 38 pieces.
	24 Studs with flats 4 ea.  3", 4", 
                5", 6", 7", 8"  lg.
	4   Coupling nuts
	4   Flange nuts
	4   T-Slot nuts
	1   T-Slot cleaner
	1   Holder
Expanded capability when used with step block
and clamp set.

Each set contains 38 pieces.
	24 Studs with flats 4 each of
                6 lengths
	4   Coupling nuts
	4   Flange nuts
	4   T-Slot nuts
	1   T-Slot cleaner
	1   Holder
Expanded capability when used with metric
step block and 
clamp kit ( AA Part # 302-00M to 302-25M)