All American Products Co.


Home
Products

  Drill Bushings
  Tooling Components
    BEDDING SUPPORT
    BALL LOCK MOUNTING SYSTEMS  NEW!
    BOLTS  NEW ITEMS!
    CLAMPS
      CLAMP SETS  NEW ITEMS!
      WELDING - CLAMPS  NEW!
    DETENT RING PINS  NEW!
    DOUBLE CAM 
    FIXTURE KEYS
    HAND WHEELS
    HANDLES  NEW ITEMS!
    HOIST RINGS  NEW ITEMS!
    KNOBS
    LINERS
    LOCATING PINS
      LOCATOR BUSHINGS
    MASTER SETTING RINGS
    MILL FIXTURE BASES
    NUTS  NEW ITEMS!
    PADS
    PLUNGERS  NEW ITEMS!
    REST BUTTONS AND REST PADS  NEW ITEMS!
    SAFETY WIRE DRILLING FIXTURE
    SCREWS
      STUD TYPE SCREWS  NEW ITEMS!
    SINGLE ACTING QUICK LOCK PINS  NEW ITEMS!
    SPRING JACK LOCKS
    SPRING STOPS
    STEP BLOCKS
    TAPPED HOLE LOCATION GAGES  NEW!
    THREAD INSERTS
      E-Z LOK THREAD INSERTS
      KEYLOCKING THREAD INSERTS  NEW!
    TOOL HOLDER BUSHINGS
    TOOLING BALLS
    TORQUE SCREWS
    WASHERS  NEW ITEMS!
    WORK HOLDING DEVICES
  Toggle Clamps

Services
Presidents Message
Receive Literature
CAD-Library
TOOLING COMPONENTS
  • FIXTURE KEYS
FIXTURE KEYS WITH REAMED HOLE

Body diameter is central to flats "A" and "B" within .002 T.I.R.
Eliminates the necessity of milling long slots or pockets for other stiles of keys. All sizes have 5/8 diameter shank making them interchangeable. Can be fastened from the bottom with a 1/4-20 socket head cap screw or from the top with a 5/16-18 socket head cap screw.
BLACK OXIDE FINISH.

PRECISION GROUND FIXTURE KEYS

Carburized and Hardened 1/32 deep. Precision Ground.
BLACK OXIDE FINISH.

SINE FIXTURE KEYS
  • INCH SIZES
  • METRIC SIZES

- Reduce fixture costs
- Cut extra set-up time
- Meet blueprint tolerances to the decimal point
- Completely interchangeable
Material 4140
Heat Treat: RC34-38
Now you can locate jig and fixtures on machine tool tables and position the part to be machined in one operation. All American Sine Fixture Keys eliminate the need to slot fixture bases, make step fixture keys, drill and tap keys. All you need to do is ream two 5/8" or 3/4" holes, depending on the table size. Variations in table slot sizes are easily taken care of by the wide variety of Sine Fixture Keys available.
Table slot sizes are designated by the "B" column. Shank sizes are designated in the "A" column. The shanks have an expansion feature whereby the keys can be locked in the fixture from either the top or the bottom of the fixture base.

 

 

 

STEP FIXTURE KEYS

Step Fixture Keys are used for two different table slot sizes by rotating key 90°.
BLACK OXIDE FINISH.


All American Products Co.
1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com

Copyright (c) 1996-2003 All American Products Co. All Rights Reserved.