E-Z LOK THREAD INSERTS
- COARSE THREAD/FINE THREAD
- METRIC THREAD
|
|
E-Z LOK THREAD INSERTS
- 303 STAINLESS STEEL PASSIVATED
- CARBON STEEL - EXTRA HEAVY WALL
|
|
| E-Z LOK THREAD INSERTS
Repair and prevent stripped threads with
E-Z lok Thread Inserts |
|
E-Z LOK THREAD INSERTS
- CARBON STEEL - THREAD REPAIR KITS
- CARBON STEEL - THREAD INSERT REPAIR
KITS - METRIC INTERNAL / METRIC EXTERNAL
- THREAD INSERT REPAIR KITS - 303
STAINLESS STEEL - PASSIVATED
|
|
|
E-Z LOK PRESS INSERTS FOR PLASTICS
FOR CORED OR DRILLED HOLES IN PLASTICSfs
E-Z LOK 240 SERIES:
This diamond knurled insert was designed to replace molded-in inserts and threads in
plastic castings. Installed "cold", press inserts sharply reduce the
cost of moldings. The number of "shots" per hour is multiplied;
reject waste caused by misaligned and faulty inserts is cut and no
re-tapping to clean threads is necessary. In addition to providing clean
threads, press inserts also provide screw-locking action unattainable in
molded-in inserts. Along with this self-locking feature, you also have
an insert that is not critical to hole depth and does not require any
secondary operation to secure the fastener in the hole.
|
|
E-Z LOK PRESS INSERTS FOR PLASTICS
E-Z LOK 260 SERIES: Where headed inserts are
required, this variation
of the standard 240 fills the bill. Recommended for use in terminal
strips and like application in electronic assemblies. |
|
| E-Z LOK FINSERS FOR WOOD & PLASTICS
|
|
| E-Z LOK FINSERS FOR WOOD & PLASTICS
|
|
| E-Z LOK FINSERS FOR WOOD & PLASTICS
|
|
|
E-Z LOK KNIFE THREAD INSERTS FOR WOOD
External knife threads provide superior holding power in hard and
soft woods, particle board and all wood products.
Use wherever field assembly or disassembly could lead to thread erosion
or stripping.
The long pilot assures straight driving into a drilled hole.
Install with screw driver, bolt and nut, tapping head, or E-Z LOK drive
tool.
|
|
|
E-Z LOK HEX DRIVE KNIFE THREAD INSERTS FOR WOOD
An inexpensive insert for use in ready-to-assemble furniture,
drawer pulls and wherever ease of assembly or avoidance of thread
stripping is desired.
Install with hex drive wrench or E-Z LOK drive tool.
|
|
E-Z LOK 303 STAINLESS STEEL/METRIC SIZES
- METRIC INTERNAL - U.S. EXTERNAL
- METRIC INTERNAL - METRIC EXTERNAL
|
|
|
303 STAINLESS STEEL KITS
|
|
|
THIN WALL CARBON STEEL THREAD INSERTS FOR METAL
Ideal for applications where thread
insert size and weight are an
issue, Thin Wall thread inserts pack all the advantages of traditional
E-Z LOK inserts into a smaller diameter design.
Available with internal thread sizes from #10 through 1/2", Thin Wall
thread inserts install with standard drills, taps and wrenches. Standard
size and pitch external threads eliminate the need for special tap or
drill sizes installation tools.
Self locking external threads with pre-applied Loctite keep Thin Walls
from backing out or vibrating loose. Immediately upon installation, the
micro-encapsulated Loctite begins to set and the newly installed insert
can be fastened to within minutes.
In addition, the adhesive seals against liquids and gases to pressures
of 6,000 psi and bonds to virtually all metals.
|
|
|
E-Z THREAD INSERT REPAIR KITS
Packaged in a heavy duty box with hinged lid and snap lock.
Refills available packed five or ten to a carton, depending on size. |
|
|
E-Z LOK THREAD INSERTS - AUTOMOTIVE DESIGNS
Repair stripped threads in spark plug ports with E-Z LOK inserts.
Open or closed end to repair stripped threads for VW cylinder head studs.
|
|
|
E-Z LOK THREAD INSERT REPAIR KITS
Packaged in a heavy duty box with hinged lid and snap lock.
Refills available packed five or ten to a carton, depending on size.
|
|
All American Products Co.