All American Products Co.

TOOLING COMPONENTS

WELDING CLAMPS

1) Additional tooling holes in the floating head increases welding access.

2) We have squarely machined the sides and base so you can use the clamp in an upright position.

3) Complete mutiple welds in one setup.

90° WELDER'S ANGLE CLAMP & ATTACHMENT
P/N	BESSEY P/N	TOTAL CAPACATY (SIDES)(IN.)	MITER JOINTS (EA. SIDE)(IN.)	JAW HEIGHT (IN.)	JAW LENGTH (IN.)	"T" CLEARANCE (IN.)	WEIGHT (LBS.)
313-00	-	4.41	2.21	1.28	3.54	1.85	8.8
313-02 *	WSM-9	7.5	3.75	1.38	4.80	2.45	11.0
313-06	WSM-12	9.5	4.75	2.50	5.32	3.92	24.2
313-10	H-Stand Offs (Set of 2)						4 OZ.
313-12	Z Axis Attachment Set						19

* Special LOW COST Model (#313-02)
Grey Cast Iron outside surface (not machined), T-Handle, copper plated screw, no tooling holes.

Drill Bushings Tooling Components Toggle Clamps
Back Receive Literature Home Page

All American Products Co.
1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com