All American Products Co. All American Products Co.DE-STA-CO MANUAL CLAMPS
 |
 |
 |
 |
|
These patented clamps provide rapid height adjustment and positive holding. They are designed with a single-unit clamp head and dbase, providing up to 8,000 lbs. of positive holding capacity for workpieces up to 60" high. The design applies 100% of the screw force directly onto the workpiece... far more than any strap clamp arrangement. What's more, there's no searching for the correct riser block height. The DE-STA-CO/Carver Clamp is one single assembly. There are no loose parts. |
When setting up, the safety lock on the back is released and the clamp lifted on the base to the desired height. When the clamp screw is turned, 100% of the force is transmitted to the workpiece. Backing off the clamp adjusting screw and releasing the safety lock and lifting the clamp head makes for rapid job changeover. |
 |
 |
| Ideal for use as manual die clamps. Eliminates the need for step blocks or riser blocks. | The T402 and T602 can be reversed on their bases to give added reach. |
Drill Bushings
Tooling Components
Toggle Clamps
Back
Receive Literature
Home Page
Copyright (c) 1996-2002 All American Products Co. All Rights Reserved.