| Model 610
straight-line action clamps are widely used for gluing
applications in the woodworking industry. The customer adds
his own spindle pads to permit using full clamping force
without damaging the wood.
REGULAR MOVEMENT
Plunger moves forward and locks as handle is moved forward.
Plunger also locks in retracted position when handle is
moved backward.
REVERSE HANDLE MOVEMENT
Plunger moves forward and locks as handle is moved backward
to horizontal position. Plunger retracts as handle is moved
forward but does not lock in retracted position.
|
MODELS 601, 601-0
Smallest of the straight-line toggle
clamps. Ideal for electronic applications and similar small
fixturing. Model 601 has an 8-32 nylon spindle assembly
(105203). Model 601-0 has externally threaded 1/4-20 plunger
tip. Red handle grip is supplied on all non-stainless steel
models.
Holding capacity: 100 lbs.
Weight: 2 oz.
Plunger travel: 5/8"
|
|
MODELS 602, 604,
624, 6004
Fully retractable locators, these
models mount directly through a member by a jam nut on the
work side or flush by drilling and tapping the member. Locks
in extended or retracted position. When flush mounted,
plunger completely retracts from work area. An optional base
mounting detail is available for Model 604 as part no.
604106, and for Model 624 as part no. 624108. Model 602 is
provided with an ergonomic handle grip, while models 604 and
624 are provided with red vinyl handle grips.
Holding capacity:
Model 602 ---------- 200 lbs.
Model 604 ---------- 300 lbs.
Model 624 ---------- 700 lbs.
Weight:
Model 602 ---------- 4 oz.
Model 604 ---------- 10 oz.
Model 624 ---------- 1 lb. 58 oz.
Plunger travel:
Model 602 ---------- 3/4 in.
Model 604 ---------- 1-1/2 in.
Model 624 ---------- 2-5/8 in.
|
|
MODEL 603
This straight-line action toggle clamp has a large holding
capacity for its size. The 603 is well adapted for use in
confined areas because of its small package size and low
height. The red vinyl handle is slanted forward to provide
an adequate grip and yet enhance the low silhouette. Locks
in both the extended and retracted positions. Plunger is
tapped for 5/16-18 adjustment spindle or detail.
Holding capacity: 600 lbs.
Weight: 11 oz.
Plunger travel: 1-1/4"
|
 |
MODEL 605
For push and pull clamping.
Furnished with red vinyl grip. Plunger is tapped for 5/16-18
adjustment spindle. Base is heat treated for added strength.
Holding capacity: 300 lbs.
Weight: 11 oz.
Plunger travel: 1-1/4"
|
 |
MODEL 606
Features an unusual 180o swiveling handle and linkage.
Model 606 can be mounted in many positions with the handle
remaining in an upright or other convenient position. This
feature and its narrow base permit use where other clamps
won't fit. Heat treated base. Red vinyl-dipped handle
provided for operator comfort. This model clamps in only the
extended position. Plunger is tapped for 5/16-18 adjustment
spindle or detail.
Holding capacity: 450 lbs.
Weight: 12 oz.
Plunger travel: 1-1/2"
|
 |
MODEL 607,
607-SQ
Extremely compact for its large capacity, this low
silhouette clamp locks in either extended or retracted
position. From the mounting surface to centerline of plunger
is only 1-1/16". Model 607 has a round plunger. Model
607-SQ has a 1/2" square plunger for multiple point
locating. Both models are drilled and tapped to accept any
5/16"-18 detail Comes complete with red vinyl-dipped
handle.
Holding capacity: 800 lbs.
Weight: 1 lb., 10 oz.
Plunger travel: 1-5/8"
|
|
MODEL 608
850 lbs. of holding capacity in a
low-profile clamp weighing only 20 ounces. Plunger locks in
both retracted and extended positions. Plunger is tapped for
3/8-16 adjustment spindle. The cast base provides added
strength. Handle is red vinyl-dipped.
Holding capacity: 850 lbs.
Weight: 1 lb., 4 oz.
Plunger travel: 1-5/8"
|
 |
MODEL 609, 609-B
This low profile clamp locks in
either the extended or retracted position. The plunger is
drilled and tapped to accept 5/16-18 customized fixture or
neoprene tipped spindle. The plunger retracts completely to
clear the work area. Also available as Model 609-B with a
straight base. Equipped with an ergonomic handle grip. Model
609 is directly interchangeable with model 605.
Holding capacity: 300 lbs.
Weight: 14 oz.
Plunger travel: 1-1/4"
|
|
MODELS 610, 618
Features De-Sta-Co balanced
construction for rigid holding and assured long life.
Plunger tip is drilled and tapped to accept any 3/8-16
accessory. Model 618 is similar except for straight base and
removable base bracket which may be positioned for varied
angular clamping. Handle grip is red vinyl dipped. Locks in
both the plunger-retracted and extended positions.
Holding capacity: 800 lbs.
Weight: 1 lb., 14 oz.
Plunger travel: 1-5/8"
|
|
MODEL
615
Similar to Model 605, except with reverse handle action.
Plunger locks in the forward position only as the handle is
moved downward. Ergonomic handle grip for greater operator
comfort. The plunger is tapped to accept any 5/16-18
threaded accessory.
|
|
MODELS 620, 628
Features a reverse handle action. As handle moves back and
down to horizontal lock position, plunger moves forward.
Model 628 is identical except for straight base and
removable bracket. Can be positioned for angular clamping by
drilling base or may be used without base. Ergonomic handle
grip included for greater operator comfort. Plunger is
tapped for any 3/8-16 accessory.
Holding capacity: 800 lbs.
Weight: 1 lb., 14 oz.
Plunger travel: 1-5/8"
|
|
MODEL 630
With a forged alloy steel base, these rugged units are
designed for heavy duty service. They offer maximum capacity
for their size. The plunger (drilled and tapped for 3/8-16
accessory) locks in either the extended or retracted
position. Red vinyl dipped handle included.
Holding capacity: 2,500 lbs.
Weight: 2 lbs., 2 oz.
Plunger travel: 2"
|
 |
MODEL 640
This straight-line action clamp is
designed for heavy-duty service and offers a full 4"
plunger travel, the longest of all the De-Sta-Co 600 Series
straight-line action clamps. The 7/8" diameter plunger
is drilled and tapped for a 1/2-13 adjustment spindle and
locks in either the extended or retracted position. The low
silhouette clamp is only 4-1/8" high for use where
overhead clearance is a problem. Red vinyl-dipped handle
supplied.
Holding capacity: 7,500 lbs.
Weight: 7 lbs.
Plunger travel: 4"
|
 |
MODEL 650
Largest holding capacity of the straight-line action clamps.
Model 650 is precision built with forged alloy steel handle
and base. Snap ring pivot pin construction allows easy
removal of plunger even after unit is mounted. Locks in
either the extended or retracted position. Plunger is tapped
to accept an 5/8-1 1 spindle or detail.
Holding capacity: 16,000 lbs.
Weight: 5 lbs., 10 oz.
Plunger travel: 3"
|
 |
All American Products Co.