All American Products Co.

Back

 DE-STA-CO MANUAL CLAMPS

Model
No.		 EDP
No.		 Cylinder
Bore		 Cylinder
Area		 Maximum
Inlet Pressure
At Max. MA*		 Mechanical
Advantage
(MA)		 Exerting
Force
at 80 PSIG
802 58020 1.13 0.994sq.in. 40psig 2:1to5:1 160/200lbs.
807-L 58071 1.13 0.994sq.in. 80psig 2:to6:1 150/500lbs.
807-UL 58070 1.13 0.994sq.in. 55psig 3:1to6:1 150/350lbs.
810-S 58101 1.50 1.767sq.in. 80psig 2.9:1to5:1 400/70lbs.
810-U 58100 1.50 1.767sq.in. 70psig 2.9:1to5:1 400/600lbs.
812 58120 0.75 0.441sq.in. 80psig 2.7:1to3.8:1 98/135lbs.
846 58460 1.50 1.767sq.in. 125psig 3.5:1to5.6:1 500/750lbs.
847-S 58471 2.00 3.141sq.in. 80psig 1.8:1to4:1 450/1000lbs.
847-U 58470 2.00 3.141sq.in. 60psig 1.8:1to4:1 450/750lbs.
849 58490 2.50 4.903sq.in. 125psig 1.7:1to2:1 1000/1200lbs.
858 58580 2.50 4.903sq.in. 200psig 2.3:1to4:1 900/1600lbs.
8071 58080 1.50 1.76sq.in. 105psig 2.4:1to4.2:1 250/450lbs.
817-S 58171 1.13 0.994sq.in. 100psig 2.5:1to4:1 200/400lbs.
817-U 58170 1.13 0.994sq.in. 80psig 2.5:1to4:1 200/320lbs.
827-S 58271 1.50 1.767sq.in. 110psig 2:1to3.5:1 300/500lbs.
827-U 58270 1.50 1.767sq.in. 95psig 2:1to3.5:1 300/500lbs.
868 58680 2.50 4.903sq.in. 200psig 2.3:1to4:1 900/1600lbs.
803 58030 1.13 0.994sq.in. 80psig 7.5:1 600lbs.
816 58160 0.75 0.441sq.in. 60psig 5.5:1 190lbs.
830 58300 1.50 1.767sq.in. 145psig 9.8:1 2100lbs.
830-10 58301 1.50 1.461sq.in. 125psig 8.1:1 1700lbs.
850 58500 2.50 4.930sq.in. 125psig 3.1:1 1200lbs.

* All power clamps may also be used with hydraulic oil as the pressure medium, but in no case 
should the inlet pressure be high enough to create an exerting force that exceeds the clamp's 
maximum holding capacity.

  Drill Bushings  Tooling Components  Toggle Clamps  
Back  Receive Literature  Home Page

All American Products Co.
 1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com

Copyright (c) 1996-2002 All American Products Co. All Rights Reserved.