Home
Products
Services
Presidents
Message
Receive
Literature
CAD-Library
|
| DE-STA-CO(tm)
Toggle Clamps
|
|
CARVER
T-SLOT STYLE
Specification
|
|
CARVER
EDGE GRIP STYLE
These low-profile clamps apply both
horizontal and vertical clamping force against the workpiece to pull
it down onto the work table as well as clamp it in position. They
are designed to be used with T-Slot tables (or bolted to a plate)
and allow maximum cutter access to the workpieces surface. Edge Grip
Clamps are excellent for milling, planing, grinding. and general
surfacing operations which are beyond the capabilities of machine
vises.
Because the Edge Grip Clamp set consists of two separate pieces-both
locked to the T-Slot table-n any length part (within the dimensions
of the table) can be clamped. |
|
CARVER
BUTTERESS STYLE
These workholding clamps are designed
for use on thin or low-profile workpieces replacing ordinary strap
clams. They feature a self-aligning swiveling pivot which allows the
tightening bolt to always remain vertical, preventing any side
forces. The two-point contact offered by Models T614-0 and
T614-1
also provides greater stability to the workpiece. The Buttress
Clamps are available in three capacities from 2,875 lbs. to 17,600
lbs. holding capacity.
Ideally suited for manual die clamping. Eliminates the need for step
blocks or riser blocks. |
|
CARVER
"C" STYLE
These DE-STA-CO/Carver clamps represent a great improvement over the
ordinary "C" Clamp. Because they are made up of two major
components-frame and moveable jaw-they are sturdier than the common
style "C" Clamp. Work is held securely by both jaws, not
one jaw and a screw.
The T-screw on these clamps is short, shielded and positioned away
from the work area. This means that it is sturdier and protected
from weld spatter and debris. Set-up is fast and easy, requiring
must a quick adjustment of the sliding jaw and a short manual turn
of the tightening screw-no cheater bar is needed. These clamps will
last much longer in service as well as providing a more positive
grip on the work.
Specification |
|
CARVER
BAR STYLE
These rugged clamps, made from high-tensile,
heat-treated steel, are designed for all types of applications
requiring large holding capacities from 1,250 to 6,000 lbs. The
clamps are highly versatile. For example, jaws can be reversed
to provide spreading action, or several jaws can be used on a single
bar both for fixturing and positive component location and clamping.
Available models include T3321 Standard-Duty Deep Throat, T285
Medium-Duty Deep Throat, T186 Standard-Duty, T-290 Medium-Duty and
T257 Heavy-Duty. In addition, standard and medium-duty connectors
are available to couple like bars together for increased clamping
reaches.
Specification |
|
|
All American Products Co.