All American Products Co.

Back

 SERIES 8200, 8300 with Sensing Option

For added safety and control, DE-STA-CO now makes it easy for users of its Models 8200 and 8300 pneumatic swing cylinders to determine exactly
when these clamps are fully open and fully closed. To sense the clamp's open and closed positions, small, low voltage Hall Effect switches are installed in a groove machined into the side of the cylinder body. The switches are actuated by a magnetic piston ring as the cylinder's piston moves up and down. The open or closed condition of the switches is then read by a programmable logic controller (PLC) or other electronic device.
Model Code & Ordering Information

SENSING SWITCH OPTIONS

Switch Options	Description	EDP No.
A	Sensor with 24" Leads	58401
B	Sensor with1 20" Leads	58402

Warning: Reverse wiring will destroy solid state electronic components. Presence of external magnetic/electromagnetic field may interfere with the operation of the sensor.

Warning: Reverse wiring will destroy solid state electronic components. Presence of external magnetic/electromagnetic field may interfere with the operation of the sensor.

Switch Options	Description	EDP NO.
T	Sensor with 24" Leads	58403
U	Sensor with 120"Leads	58404

Warning: Reverse wiring will destroy solid state electronic components. Presence of external magnetic/electromagnetic field may interfere with the operation of the sensor.

  Drill Bushings  Tooling Components  Toggle Clamps 
Back  Receive Literature  Home Page

Copyright (c) 1996-2002 All American Products Co. All Rights Reserved.