All American Products Co.

Back  Drill Bushings  Tooling Components  Toggle Clamps  Receive Literature  Home Page

DE-STA-CO(tm) POWER CLAMPS

SERIES 8000, 8100, 8200, 8300

SERIES 8000/8100		SERIES 8200/8300
A--------(2.87)-----	-------------------LONG ARM-----------------	-------(3.75)------D
B--------(1.75)------	--------------STANDARD ARM-------------	--------(2.75)------E
C---------------------	NO ARM (STRAIGHT PULL T-ARM)	---------------------F

- 90o swing of clamping arm minimizes obstruction in the workspace and makes loadingor
unloading of parts easy.
- 1/2" clamping stroke (downward arm travel) allows wide variation in part size. The clam
p adjusts automatically on every cycle.
- Quick swing-and-clamp movement reduces cycle times in your operation.
- Pneumatic operation is economical and clean, and allows precise control and monitoring
of the clamping force.
- Multiple mounting options allow the clamp to be adapted to the fixture for the best use of
space and to minimize installation time.
- Clamping force is adjustable across a wide range: 20 lbs. to 160 lbs. Clamp exerts just
the force your operation requires ... without deforming delicate parts.
- Broad operating temperature range of -40 degrees F to 250o F allows installations in
extreme environments.
- Multiple arm options including standard arms, long arms, "T" arms and "blank" arms 
or user adaptation.

8000, 8200 Mounting Options			8100, 8300 Mounting Options
Threaded body in a tapped hole. Position is locked by a single cap screw into a tapped hole in fixture,	Cylinder body passes through a clearance hole. Three mounting screws pass through the top flange into holes tapped in fixture.	Optional mounting block 821550 may be used above or below the work surface. Clamp height is easily reset.	Can be mounted to the side or front of the fixture, or mounted back to back for multiple clamping operations.	Mounted to the surface through mounting holes unit.

  Drill Bushings  Tooling Components  Toggle Clamps 
Back  Receive Literature  Home Page

Copyright © 1996-2002 All American Products Co. All Rights Reserved.