All American Products Co.

Back

 DE-STA-CO MANUAL CLAMPS

• HEAVY-DUTY HOLD-DOWN PRODUCTION CLAMPS

				Opens a full 210 degrees to completely clear the work area  The combination of mounting flexibility and full opening capacity make these clamps extremely versatile for heavy-duty holding jobs such as auto body fixtures and similar applications.
Model Code & Ordering Information
Model No.	Base Option		Hold-Open Options		Pre-Load Options	Pipe-Handle Option
501 503 505 506 508	B= FB= LB=	Pivot Base. Permits bolting the clamp linkage to the base accessory and welding it in a position to suit the application. Base with two dowel holes and one screw hole. Can be added to selected models and welded into set positions. Long Base. Permits tongue-mounting the linkage to a tang and bolting it in place.	LSC=Spring Clip and Urethane Bumper Assembly. Holds the clamp open under spring tension only. POL=Positive Open Latch. Prevents accidental clamp closing before workpiece is in position. R=Toggle-Lock Plus locking release lever. Can positively maintain the open and closed position of the clamp.		PL=Pre-load Nut and Set Screw. Can maintain the arm in a registered closed position. The clamp locks against itself to avoid accidental opening in applications where no load is placed on the clamp arm.	H=	Pipe Handle. Not Welded.

  Drill Bushings  Tooling Components  Toggle Clamps 
Back  Receive Literature  Home Page

Copyright (c) 1996-2002 All American Products Co. All Rights Reserved.