|
|
Side Pull Hoist Rings - 473-11
This Hoist Ring is made out of high strength alloy steel and
has a 5:1 strength factor. The clevis, ring, bushing and cap
screw are magnetic particle inspected. The Clevis is also
x-rayed. The swivel and pivot action of the Side Pull Hoist
Ring allows you to flip and turn parts without unhooking. You
are also able to use almost any hook because of the extra
large diameter rings.
- Black Oxide Finish
- Zinc Plated Bushing
Side Pull Hoist Rings - 473-11
| P/N |
*Capacity in lbs |
A - Thread Size |
B |
C |
D |
E |
F |
G |
*Thread Torque (ft, lbs) |
Bolt Kit P/N |
Thread Size |
| 473-11 |
650 |
5/16-18 |
2 |
2-1/8 |
2 |
1-1/2 |
5/8 |
3/8 |
3.5 |
473-41 |
5/16-18 |
| 473-12 |
800 |
3/8-16 |
2 |
2-3/8 |
2 |
1-1/2 |
3/4 |
3/8 |
4.5 |
473-42 |
3/8-16 |
<
| 473-13 |
1,800 |
1/2-13 |
3 |
3-3/8 |
3-3/16 |
2-3/8 |
1 |
5/8 |
15.0 |
473-43 |
1/2-13 |
| 473-14 |
2,500 |
5/8-11 |
3 |
3-5/8 |
3-3/16 |
2-3/8 |
1-1/4 |
5/8 |
25.0 |
473-44 |
5/8-11 |
| 473-15 |
4,100 |
3/4-10 |
4 |
5 |
5 |
3-3/4 |
1-1/2 |
1 |
50.0 |
473-45 |
3/4-10 |
| 473-16 |
7,100 |
1-8 |
4 |
5-3/8 |
5 |
3-3/4 |
2 |
1 |
90.0 |
473-46 |
1-8 |
| 473-17 |
14,000 |
1-1/4-7 |
6 |
6-7/8 |
6-13/16 |
4-5/8 |
2 |
1-3/8 |
150.0 |
473-47 |
1-1/4-77 |
| 473-18 |
17,200 |
1-1/2-6 |
6 |
7-7/8 |
6-13/16 |
4-5/8 |
2-1/2 |
1-3/8 |
250.0 |
473-48 |
1-1/2 |
| 473-19 |
29,000 |
2-4-1/2 |
5-1/4 x10-1/2 |
10 |
6-13/16 |
4-5/8 |
3-1/8 |
1-1/2 |
300.0 |
473-49 |
2-4-1/22 |
* - Stated load capacity based on specific thread torques are as shown in the chart.
** - It is recommended that these torques be used when installing hoist rings |
