Hoist Rings - All American Products Group

SITE SEARCH

Side Pull Hoist Rings - Metric - 473-51

This Hoist Ring is made out of high strength alloy steel and has a 5:1 strength factor. The clevis, ring, bushing and cap screw are magnetic particle inspected. The Clevis is also x-rayed. The swivel and pivot action of the Side Pull Hoist Ring allows you to flip and turn parts without unhooking. You are also able to use almost any hook because of the extra large diameter rings.

- Black Oxide Finish
- Zinc Plated Bushing

Side Pull Hoist Rings - 473-51

Side Pull Hoist Rings

P/N	*Capacity in kg	A	B	C	D	E	F	G	*Thread Torque (kg-m)	Bolt Kit P/N	Thread Size
473-51	325	M8 x 1.25	50.8	61.0	50.8	38.1	16.0	9.5	.43	473-91	M8
473-52	500	M10 x 1.50	50.8	63.0	50.8	38.1	20.0	9.5	.60	473-92	M10
473-53	725	M12 x 1.75	76.2	85.0	81.0	60.3	24.0	15.9	2.00	473-93	M12
473-54	1400	M16 x 2.00	76.5	94.0	81.0	60.3	31.0	15.9	3.50	473-94	M16
473-55	2290	M20 x 2.50	101.6	133.0	125.4	95.3	40.0	25.4	7.00	473-95	M20
473-56	3050	M24 x 3.00	101.6	147.0	125.4	96.3	47.0	25.4	12.50	473-96	M24
473-57	4850	M30 x 3.50	127.0	173.8	173.0	117.5	43.6	31.7	34.60	473-97	M30

* - Stated load capacity based on specific thread torques are as shown in the chart.
** - It is recommended that these torques be used when installing hoist rings