All American Products Co.

Back  Drill Bushings  Tooling Components  Toggle Clamps  Receive Literature  Home Page

DRILL BUSHINGS

This drill bushing is the most popular and least expensive.
Permits close spacing mounting flush with jig surface without counterboring.-
[Technical Information] [Ordering Information]

I.D. and O.D. Range:

- I.D. RANGE (A) +.0003/+.0007 1.5000-2.0000 1.5000-2.1250 1.5000-2.3750 1.7500-2.5000 2.2500-2.7500 2.2500-2.8750 2.5000-3.0000 2.5000-3.1250 2.7500-3.3750 3.0000-3.6250 3.0000-3.7500 3.3750-3.8750 3.3750-4.1250 3.6250-4.2500
- O.D.** (B) 2-3/8 (2.3775/2.3771) 2-1/2 (2.5025/2.5021) 2-3/4 (2.7525/2.7521) 3" (3.0028/3.0023) 3-1/4 (3.2528/3.2523) 3-3/8 (3.3778/3.3773) 3-1/2 (3.5028/3.5023) 3-3/4 (3.7528/3.7523) 4" (4.0028/4.0023) 4-1/4 (4.2530/4.2525) 4-3/8 (4.3780/4.3775) 4-1/2 (4.5030/4.5025) 4-3/4 (4.7530/4.7525) 5" (5.0030/5.0025)
LENGTH (C) ANSI CODE 152 160 176 192 208 216 224 240 256 272 280 288 304 320
3/4 12 27.14 27.77 35.46 43.26 55.22 56.26 58.45 59.49 61.20 62.40 64.48 67.18 70.41 74.46
1 16 28.60 30.37 36.71 44.10 56.99 58.08 58.76 60.74 62.61 64.43 66.14 68.43 72.49 77.27
1-1/4 20 30.52 30.78 38.48 46.07 57.67 58.81 60.06 61.93 64.84 66.46 68.95 71.76 74.83 79.46
1-1/2 24 32.81 33.59 40.77 47.16 58.76 59.85 61.93 65.52 66.98 68.85 70.93 73.84 76.80 82.68
1-3/4 28 34.22 35.05 41.86 48.78 60.27 61.41 62.92 67.91 69.11 71.34 73.27 75.97 78.88 85.59
2 32 36.04 36.97 43.63 50.08 61.52 62.71 66.98 70.62 71.40 74.36 75.24 77.79 81.22 88.76
2-1/8 34 37.18 37.96 44.51 - - - - - - - - - - -
2-1/4 36 38.84 39.94 46.54 53.20 65.00 66.20 70.36 73.32 74.36 76.80 77.79 81.22 83.88 91.88
2-1/2 40 40.77 44.72 48.67 55.38 66.82 68.12 73.01 74.52 76.80 79.35 81.22 83.88 86.84 94.95
2-3/4 44 45.14 46.33 54.34 62.30 68.95 70.25 75.97 78.88 79.46 82.16 84.19 87.20 90.22 98.38
3 48 52.68 53.46 58.92 64.53 70.82 72.23 79.40 81.12 82.73 85.18 87.46 90.27 93.18 101.40
3-1/4 52 54.34 55.22 63.08 66.46 73.01 74.41 83.10 85.07 85.85 88.30 91.21 94.02 96.82 104.78
3-1/2 56 55.95 56.73 64.43 68.85 74.88 76.34 86.48 87.98 89.13 91.57 94.69 97.81 100.36 109.15
3-3/4 60 57.15 58.81 66.82 69.84 76.65 78.10 90.22 91.88 92.40 95.32 98.96 101.50 104.52 113.83
4 64 58.29 59.28 66.98 70.98 78.78 80.24 93.65 95.63 96.04 99.22 102.80 106.03 108.94 118.25
4-1/4 68 60.27 61.20 69.11 74.15 80.81 82.32 96.30 99.22 100.46 103.64 107.28 110.40 113.83 123.97
4-1/2 72 62.04 63.18 70.88 76.65 82.94 84.45 99.74 103.32 104.78 107.90 111.54 115.08 118.61 128.70
4-3/4 76 64.01 65.16 73.11 78.88 84.97 86.68 102.96 106.81 109.04 112.22 116.12 119.76 123.81 133.85
5 80 65.94 67.70 75.30 82.16 88.30 89.96 106.65 110.66 113.67 116.74 120.74 124.59 128.80 138.89
5-1/2 88 - - - - - 93.65 111.07 118.20 122.67 125.79 130.05 134.26 138.37 148.62
6 96 - - - - - - - 125.79 130.99 134.94 139.57 143.83 148.62 158.34
6-1/2 104 - - - - - - - - 139.78 143.83 148.51 153.30 157.92 168.64
7 112 - - - - - - - - - - 155.17 164.48 170.82 179.66

* See below for unground OD dimensions.
** Unground OD's are ground oversize .0150/0200 to suit customers' requirements.
† All bushings are finish ground unless the letter "U" appears with the bushing type or the ANSI symbol.

TYPE PU (UNGROUND OD)

O.D. Actual Dimensions O.D. Actual Dimensions
2-3/8 2.395 - 2.390 3-3/4 3.770 - 3.765
2-1/2 2.520 - 2.515 4 4.020 - 4.015
2-3/4 2.770 - 2.765 4-1/4 4.270 - 4.265
3 3.020 - 3.015 4-3/8 4.395 - 4.390
3-1/4 3.270 - 3.265 4-1/2 4.520 - 4.515
3-3/8 3.395 - 3.390 4-3/4 4.770 - 4.765
3-1/2 3.520 - 3.515 5 5.020 - 5.015

QUANTITY DISCOUNT for same size, length and type.

1 - 3 List 13 - 24 List Less 25%
4 - 6 List Less 8% 25 - 49 List Less 30%
7 - 12 List Less 18% 50 plus List Less 33%

  Drill Bushings  Tooling Components  Toggle Clamps 
Back  Receive Literature  Home Page

All American Products Co.
 1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com

Copyright (c) 1996-2002 All American Products Co. All Rights Reserved.