All American Products Co.

HEADLESS LINER, TYPE "L", DRILL BUSHINGS
(FINISH GROUND AND UNGROUND O.D.)
Sizes 1-3/4" I.D. X 2-1/4" O.D.

The liner drill bushings are permanently pressed into a drill jig or fixture plate to provide a precise and stable location for renewable drill bushings in addition to protecting the hole in the jig plate from wear caused by frequent drill bushing replacement.
[Technical Information] [Ordering Sample]

I.D. RANGE "A"	O.D. FINISH GROUND "B"	O.D. UNGROUND† "B"	LENGTH "C"	SIZE "F"	SIZE "G"	ANSI SYMBOL†	PRICE CODE
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	3/4	2-3/8	3/16	HL-144-12	191
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	1	2-3/8	3/16	HL-144-16	184
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	1-3/8	2-3/8	3/16	HL-144-22	192
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	1-1/2	2-3/8	3/16	HL-144-24	198
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	1-3/4	2-3/8	3/16	HL-144-28	205
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	2-1/8	2-3/8	3/16	HL-144-34	218
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	2-1/2	2-3/8	3/16	HL-144-40	231
1-3/4 (1.7508/1.7512)	2-1/4 (2.2525/2.2521)	2-1/4 (2.270/2.265)	3	2-3/8	3/16	HL-144-48	264

Notes:
† All bushings are finish ground unless the letter "U" appears with the bushing type or the ANSI symbol.

Drill Bushings Tooling Components Toggle Clamps
Back Receive Literature Home Page

All American Products Co.
1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com hl_06.htm