All American Products Co.

Back

HEADLESS LINER, TYPE "HL", DRILL BUSHINGS
(FINISH GROUND AND UNGROUND O.D.)
Sizes 1/2" I.D. X 3/4" O.D.

The liner drill bushings are permanently pressed into a drill jig or fixture plate to provide a precise and stable location for renewable drill bushings in addition to protecting the hole in the jig plate from wear caused by frequent drill bushing replacement.
[Technical Information] [Ordering Sample]

I.D. RANGE
"A"		O.D.
FINISH GROUND
"B"		O.D.
UNGROUND†
"B"		LENGTH
"C"		 SIZE "F"

SIZE

"G"

ANSI
SYMBOL†		PRICE
CODE
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)5/167/83/32HL-48-5115
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)3/87/83/32HL-48-6117
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)1/27/83/32HL-48-8117
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)3/47/83/32HL-48-12121
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)17/83/32HL-48-16128
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)1-3/87/83/32HL-48-22136
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)1-1/27/83/32HL-48-24141
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)1-3/47/83/32HL-48-28147
1/2 (.5002/.5005)3/4 (.7518/.7515)3/4 (.770/.765)2-1/87/83/32HL-48-34156

Notes:
† All bushings are finish ground unless the letter "U" appears with the bushing type or the ANSI symbol.

  Drill Bushings  Tooling Components  Toggle Clamps 
Back  Receive Literature  Home Page

All American Products Co.
 1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com hl_02.htm

Copyright (c) 1996-2002 All American Products Co. All Rights Reserved.