All American Products Co.

HEAD PRESS FIT, TUNGSTEN CARBIDE - TYPE "HC" DRILL BUSHINGS
Sizes 1" - 1-3/4 X 2-1/4 O.D.

Permits close spacing mounting flush with jig surface without counterboring.
Quoted on request as specials and are not returnable.
[Ordering Sample]

I.D. RANGE "A"	O.D. FINISH GROUND "B"	LENGTH "C"	ANSI SYMBOL
1 - 1-3/4 (1.3750/1.7500)	2-1/4 (2.2525/2.2521)	1	HC-144-16
1 - 1-3/4 (1.3750/1.7500)	2-1/4 (2.2525/2.2521)	1-3/8	HC-144-22
1 - 1-3/4 (1.3750/1.7500)	2-1/4 (2.2525/2.2521)	1-3/4	HC-144-28
1 - 1-3/4 (1.3750/1.7500)	2-1/4 (2.2525/2.2521)	2-1/8	HC-144-34
1 - 1-3/4 (1.3750/1.7500)	2-1/4 (2.2525/2.2521)	2-1/2	HC-144-40
1 - 1-3/4 (1.3750/1.7500)	2-1/4 (2.2525/2.2521)	3	HC-144-48

Notes:
* All carbide parts are special and not returnable.

Drill Bushings Tooling Components Toggle Clamps
Back Receive Literature Home Page

All American Products Co.
1135 Aviation Pl., P.O. BOX 190, San Fernando, CA 91340
Tel.: (818) 361-0059, Fax: (818) 898-2236
E-Mail Address: sales@allamericanproducts.com hc_14.htm